Learn nautilus
This course teaches nautilus in short lessons, one idea each, practical first: how to use it day to day, then why it works that way. Each lesson is a page you can finish in ten minutes, and where it helps, a project you can run in your browser and, later, a short video.
Getting started
Section titled “Getting started”- What nautilus is
- Install the CLI and the editor
- Your first controller, running
- Read the dashboard and the tags
- When something goes wrong
Programming
Section titled “Programming”Interactive lessons run in your browser: the lesson on the left, a controller on the right, and a Check button that tests your answer.
- First program: blink an output
- A motor start/stop in ladder (the seal-in)
- A timer: warn before the motor starts
- Count things: edges and counters
- Test it, in virtual time
- Your own function block
- Two tasks, two scan rates
- Four languages, one controller
I/O and protocols
Section titled “I/O and protocols”- Read one Modbus register, with no hardware
- From a datasheet to a device map
- Serve your tags over OPC UA
- Publish your tags over MQTT (Sparkplug B)
- Read a plant OPC UA server
- Read a Logix controller over EtherNet/IP
Operator screens
Section titled “Operator screens”- A screen in five minutes
- A button and a setpoint that write
- Alarms: raise, acknowledge, shelve
- Keep history, and ask it questions
Deploy and operate
Section titled “Deploy and operate”- Put it on a Linux box, and let operators open the screen
- Update, roll back, and back up
- Who may operate it
- Sign in with your company login
Coming from Logix
Section titled “Coming from Logix”Working with an AI agent
Section titled “Working with an AI agent”More lessons follow. Until they are here, these guides cover the rest:
- Programming: Your first program, the languages, function blocks and tasks, testing
- I/O and protocols: Modbus, OPC UA, EtherNet/IP, Sparkplug
- Operator screens: Operator screens
- Deploying: Continuous deployment
- An AI agent: AI assistants
Prefer one long walk-through? The tutorial builds a motor start/stop from nothing in about an hour.
nautilus is free and open source (Apache 2.0), built by Joy Automation. For implementation or support on your site, see Joy Automation services. Privacy.